Simplex wood flooring
-rigid core with wood veneer
UV Coating + Wood Veneer +Rigid Core board
This product has eight advantages over previous traditional engineered hardwood flooring.
To make up for the shortcomings of the past product.
As two-layer engineered hardwood flooring, it can avoid ADD and CVD for the EU & USA market.
| Advantages |
Wood |
Standard Engineered wood |
| Real wood veneer with natural looking |
√ |
√ |
| Good foot sense |
√ |
√ |
| Can be wet mopped = easy-to-clean |
√ |
χ |
| Stable to high temperature and humidity variations |
√ |
χ |
| Suitable for Every room |
√ |
√ |
| Impact Resistant & Indentation |
√ |
√ |
| No acclimation required |
√ |
χ |
| Minimum Preparations |
√ |
χ |
This is is a new type of product that will replace the market share of the SPC fooring and multilayer fooring in the near furture. It has the advantage of engineered wood fooring, because the top layer is veneer, bring the beauty and warmth of hardwood into all areas of your homes, very good foot sense. Meanwhile, the based core of this kind of fooring is SPC material. The thickness swelling rate of this product is 0.55% after SGS test, very good performance, totally waterproof. It largely overcome the shortcomings of non-waterproof for engineered wood. On the other hand, wood veneer on its top layer is more inartificial compares with the decor paper of SPC fooring.
As for the feature option for SPC+veneer fooring are as follows: We could make all kinds of species like Oak, Hickory, Teak, Walnut and so on.
| |
Standard |
Result |
|
Standard |
Result |
| Abrasion resistance |
ASTM D4060-14 |
≥ 300R |
Dimensional stability(warp) |
GB/T 4085-2015 |
0.05% |
| Scratch resistance |
EN 438-2:2005 |
≥ 2N |
Dimensional stability (exposed) |
GB/T 4085-2015 |
0.02% |
| Micro-scratch resistance |
EN 16094 |
2 |
Formaldehyde emission |
EN 13968:2004+A1:2015 |
≤0.7mg/L |
| Locking strength |
ISO 24334-2014 |
≥ 125N |
Phthalate test |
EN 14372:2004 |
Pass |
| Immersion & delamination |
ISO 13608 Annex A &
ISO 12466-1:2007+Amd.1:2013 |
Not visible |
Heavy metal test |
EN 71-3:2013+A3:2018 |
Pass |
){kind=link}